Haweka is currently offering one free alignment check to dealers and CV/PSV operators, with over 20 vehicles, that are considering bringing wheel alignment in-house.
The new Axis200 wheel alignment machine measures a tri-axle in less than10 minutes - it's able to do this due to its laser measuring head and easy to use magnetic chassis scales.
Director of Haweka UK, John Pullin, said: "In the past, alignments were a case of trial and error, with repeated adjustments and re-measurement.
The Axis200 uses a combination of high-tech lasers, with sophisticated software, so the alignment can be done right first time. By offering free alignment checks we are hoping to demonstrate to fleet operators how economical having their own alignment equipment can be an benefit from reduced runningcosts."
Every free check undertaken Haweka will provide a detailed print out to the customer of adjustments required and any necessary recommendations.
When wheels are aligned correctly, as well as fuel and tyre benefits emissions are reduced, there is less wear and tear on mechanical components, drivers report reduced fatigue and tyres are less likely to overheat.
For more information about the Haweka Axis200 or to book a free alignment check, call Paul Collins at Haweka on 01242 621001 or email paul.collins@haweka.co.uk

t.I.M's Commercial Vehicle Services in Ilkeston, Derbyshire has recently invested in a Haweka Axis4000 camera wheel alignment system to update their workshop equipment and enable them to help their customers save on fuel and tyre costs.
The Axis4000 is the top-of-the-range wheel alignment system which enables real-time, highly accurate and fast measurements to be made. Almost all types of commercial vehicles, including small vans, can be measured by the aligner.
Group Fleet Manager at t.I.M's, Dave Williams, Said:"We had been looking at alignment equipment for a while before Haweka contacted us about the Axis4000. The main reason for purchasing the Axis4000 is that all the relevant vehicle data can be quickly inputted and displayed, enabling fast adjustments when undertaking servicing and PDI work. The aligner is being used about 3 times a week and is easy to operate. The equipment has been a very worth while investment for t.I.M's."
www.timcommercials.co.uk

Hunwick Engineering Ltd in Halstead, Essex has invested in a Haweka Axis200 wheel aligner with trailer kit to enable them to ensure the alignment on new trailers is accurate before they leave the factory.

The Axis200 is the leading alignment system in the UK, taking less than 10 minutes to accurately measure every angle on a truck in the as driven position - there is no need to lift the vehicle. The alignment system can be used on twin steer, rigid, semi-trailers and buses.

Martyn Wood, Technical Director at Hunwick's said:"Poor wheel alignment increases tyre drag on the road wasting rubber and increasing fuel use. By aligning the wheels and axles the trailer becomes more streamlined and drives as we intended. The Axis200 was specially adapted for our range of trailers and is used at least three times a week. The aligner is easy to use and has reduced idle time and costs in the workshops waiting for third parties to arrive to check tracking."
www.hunwick-transporter.com

Transport operators looking to save on fuel consumption and tyre wear have the opportunity to attend a demonstration of equipment that does just that.

On Wednesday 7th March at 7pm Haweka UK will demonstrate the Axis200 laser aligner and TD502 on tuck brake lathe to IRTE members from the Exeter region at Stuarts Truck and Bus in Sidmouth Road, Exeter.

Haweka are the number one supplier in the UK of commercial vehicle alignment systems and wheel balancing accessories,who are working very closely with commercial fleets to reduce fuel costs and extend tyre lifespan.

If you are an IRTE member and would like to attend the cost saving demonstration on the 7th March, contact Paul Collins at Haweka UK on 01242 621001 or email paul.collins@haweka.co.uk

City West Commercials in Bristol,Devon, Somerset and Cornwall invested in two Axis200-2 wheel aligners and two car kits to enable them to help their customers save costs on fuel and tyres.
The Mercedes-Benz dealer purchased the two aligners after seeing a demonstration of the equipment in their workshops.
Stewart McLagan, Aftersales Director said: "The Axis200 is a valuable piece of tooling which enables the technicians carrying out the job to set and align vehicles accurately. This means the vehicles we service will have their wheels perfectly aligned and can be driven away by the customer as our Mercedes-Benz manufacturer intended. Our customers will enjoy reduced running costs through fuel consumption, savings on tyre
costs and a more comfortable ride overall."
The Axis200-2 is used by City West Commercials 2-5 times a week to perfectly align vehicles, allowing customers to enjoy reduced running costs as well as decreasing carbo emissions, increasing driver comfort and vehicle safety.

Barnes Group in Shoreham-by-Sea and Guildford have invested in two Haweka Axis200 wheel aligners to enable them to help their customers save costs on fuel and tyres.
Alan Matthews, DAF Group Service Manager said: "Wheel alignment offers a cost effective solution to the customer with greater tyre life and better fuel economy. The cost of checking and adjusting the alignment of the steering is less than the cost of one new tyre."
Alan went on to say "we purchased the kit to update the facility that we have in both workshops as we had issues in the past regarding incorrect settings causing loss of revenue to the company but the Axis200 is very easy to use and set up."
www.barnes-group.co.uk/daf